Preparations Before Using - Victure HC400 Manual Del Usuario

Preparations before Using

Step1
Step1: Open the battery compartment located on the right side of
the camera as shown above;
Step2: Insert 8 AA LR6 batteries in the correct direction;
Step3: Turn off the read-write protection of the SD card, which loc-
ated in the left of the card, so that the camera can recognize
the card.
Step4: Insert the SD card and then toggle the mode switch into TEST.
After the machine is turned on, enter the settings interface to
format the card with the camera's format function.
Tip:
This machine supports SD card which is Class 6 or above. The camera
maximum support 32 GB SD card.
Step2
7
Step3 Step4