Definition Of Functions And Parameters; Start Button - Genius Audio GDSP-31404A Manual Del Usuario

5.5.7. Equalizer frequency response drag area
In this area, you can hold down the left mouse button and drag the mouse to
finish and change the 31-band EQ parameter settings.

5.5.8. DEFINITION OF FUNCTIONS AND PARAMETERS:

(1) Frequency
PEQ mode, (parametric equalizer), you can adjust the
frequencies put the numbers or move the mouse or use the
keyboard arrow keys to set the frequency (range: 20HZ-20KHz),
you can change the mode (PEQ MODE) or (GEQ MODE), pressing
the same key.
GEQ (graphic equalizer) mode, the frequency is 1/3 of an octave
from the default value assignment, and the specific value is not
shown here.
(2) Q Value
In PEQ (parametric equalizer) Mode, you can adjust the Q value (range:
0.15.30-50) by placing the numbers, rotating the mouse, or using the
keyboard arrow keys; In graphic equalizer mode, the Q value is 1/3 of an
octave from the default value assignment, and does not display the specific
value here.
(3) Gain
You can adjust the gain by adding the numbers directly or move the mouse or
use the keyboard arrow keys for frequency (range: -15dB ~ 15dB), or press the
buttons directly to set the gain.

(4) Start button

For each band you have 1 Button (31 Bands-EQ) that can start this band
accordingly
(5) Reset button EQ
Left-click and a pop-up dialog box appears, select "YES" to reset all 31 EQ
Bands.(frequency, Q value and gain back to the preset state, that is (1/3
Octave)
Note: The preset cannot be recalled again once you click Reset Button!
GDSP-31404A
Genius CarAudio
22