Amibot glass AG30 Manual De Instrucciones página 15

Operating the appliance
Pause
To stop AMIBOT, press the Start/Pause button on the robot (1) or the
Pause/Restart button on the remote control (2).
Stop
When AMIBOT stops its cleaning cycle, it returns to the place it
started and beeps.
Remove the robot from the glazed surface
Take hold of the robot's handle and press the Start/Pause button (1)
for around 2 seconds so the suction fan stops. AMIBOT can then be
removed from the window safely.
Remove the safety cord
If the safety cord was installed beforehand, it can now be removed.
Switch off
Before performing maintenance,
switch off
appliance, as a security measure.
13
EN
and unplug the