Tena SmartCare 91280 Instrucciones De Uso página 28

EN TROUBLESHOOTING
PROBLEM
Connection
error (signal
lost)
Change
Indicator falls
SOURCE SOLUTION
System Super user:
range
3. If this does not help, contact TENA
SmartCare support.
Change Caregiver:
Indicator
1. Make sure you are using one of the
supported TENA incontinence products
Indicator does not attach to absorbent
products with a plastic outer lining.
2. Make sure you attach the Change Indicator
to a folded product, straight from its plastic
packaging. Do not attach the Change
Indicator when the resident is already
wearing the absorbent product.
3. Check the hook-covered side of the sensor
any lint.
4. If this does not help, contact a super user
at your care home and revert to a manual
changing procedure for residents'
incontinence products until the problem
is resolved.
Super user:
4. If this does not help, attach a new sensor
strip. Make sure the new sensor strip is of
the correct length (see p.18 of this guide).
5 If this does not help, contact
TENA SmartCare support.
28
TENA SmartCare Change Indicator TM/MC