Programming Functions - Speed Link X-Warrior SL-2215 Manual Del Usuario

Programming functions

The A, B, X, Y, black, white, L and R buttons can, for
example, be assigned step sequence combinations to
make it easier to use when playing.
1. Press the "Prog" button. The LED lights red.
2. Press the button to which you wish to assign a step
sequence. The LED flashes.
3. Enter the step sequence and press the "Prog"
button again. The red LED goes out.
Example: Press on "Prog" and then button "A".
Enter the step sequence "Y, B, Up button, black"
and press "Prog" again. If you now press the "A"
button when playing, the programmed step
sequence is carried out.
Note: There can be up to 16 steps in a sequence. If
you exceed this number, the red LED automatically goes
out. However, the programming remains stored.
The programming remains stored even after removing
the controller from the game console.
Erasing programming
If you want to erase any programming you have
entered, proceed as follows:
7
D
GB
F
E
I