Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
SH360 series multifunctional swivel head riveter is a highly versatile riveter. It is designed to fasten rivets, riv-
et nuts and rivet studs and the head could rotate 360 degrees for easy riveting in odd angle application. SH360
tools feature QuickSwitch with 3 steps dismount and 3 steps assembly for functional changes and the extended
nose design allows it to reach into deep work piece. SH360 tools are capable fastening both metric and SAE
with corresponding accessories.
SAFETY INFORMATION
Read instructions carefully before operating riveter and save them for future reference.
•
Keep out of reach of children.
•
Wear safety glasses when operating tool.
•
Watch out for potential hazards such as electrical wires.
•
Do not over reach so as to cause loss of balance or loss of secure footing.
INSTALLATION/OPERATION
Fastening Rivet:
Figure 1: Installing accessories for fastening rivet
•
Select nosepiece for the size of blind rivets to be used.
•
Install the accessories as illustrated in Figure 1 with the handles closed. Secure the accessories with correct
rotation as indicated below each of the accessories.
•
Insert rivet into tool with the handles open. You may also install the rivet into the work piece first
•
Position the tool for operation.
•
Squeeze the handles. Multiple strokes may be required for longer rivets.
•
When handles are released rivet stem will be automatically released. Discard/recycle the rivet stem.
Fastening Rivet Nuts or Rivet Studs:
Figure 2: Installing accessories for fastening rivet nut or rivet stud
Figure 3: Rivet Nut Mandrel
Figure 4: Rivet Stud Mandrel
Figure 5
Publicidad
Tabla de contenido
