Slow Motion Mode; Advanced Settings; Settings; Maintenance - TnB SPORT XP30 Manual De Instrucciones

EN FR
Burst
Burst mode captures up to 10 photos per second. This is the ideal capture mode
for high-speed action.
The following rates are available:
- 3 photos/second
- 5 photos/second
- 10 photos/second

SLOW MOTION MODE

Slow Motion mode enables you to record a video in slow motion.
Two capture modes are available in Slow Motion: Full HD (1080p - 60 FPS) or
HD (720p - 90 FPS). To obtain good, fluent slow motion, it is recommended to
choose the setting with the most frames per second.

ADVANCED SETTINGS

Exposure value (EV) compensation
Exposure value compensation (EV) affects the brightness of your video. Adjus-
ting this setting may improve image quality when shooting in environments
with contrasted brightness.
The options for this setting are -2.0 to +2.0. The default setting is +0.0.
When you adjust this setting, the result is instantly visible on the screen. Positive
values produce brighter images, and negative values produce darker images.
White balance
White balance enables you to correct the dominant colour on a photo, caused
by the light source that illuminates your subject. There are five different modes:
- Auto: the light automatically adjusts according to the environment
- Sunny: for scenes directly exposed to sunlight
- Cloudy: for daylight, when the subject is in the shade
- Incandescent light: for incandescent lights (bulbs in your home, for example)
- Fluorescent light: for various halogen-type lights, sodium vapour lights,
mercury vapour lights, etc. You can, for example, use this mode to compensate
for the lighting in a gymnasium, street lighting, etc.
WiFi
Enable or disable the WIFI function.
The name of the WiFi signal is: T'nB Cam XP30 and the password is 1234567890
Image rotation
This setting determines the orientation of your video or photos to prevent you
from capturing images upside down. If this mode is enabled, you can shoot at
180°. Your camera therefore records in the correct direction automatically.
23
Car mode
This mode enables you to use your camera in dashcam mode. It lets you auto-
matically start recording a video when the camera is connected to the cigarette
lighter socket of your vehicle.
LED
Determines the status of the white LED at the back of the camera. If it is en-
abled, the LED stays on when the camera is on and flashes when you record.
Screen saver
Switches your camera's display to standby mode after a period of inactivity
to conserve battery life. The options are: 30 seconds, 1 minute, 3 minutes or
Disabled. To reactivate the screen, press any button on the camera.
Automatic off
Turns off your camera after a period of inactivity to conserve battery life. The
options are: 1 minute, 3 minutes, 5 minutes or Disabled.
Date stamp
Enable or disable date stamp on your photo/video.

SETTINGS

Language
Sets the language of the camera's user interface.
Date-Time
The date and time are manually adjustable.
Format
Formats your SD card but retains your camera settings.
Default settings
Restores camera settings to factory settings. Restoring the factory settings does
not erase the contents on your microSD card. To reformat your microSD card,
use the «Format» setting above.
Firmware version
The current version of the camera.

MAINTENANCE

Maintenance of your camera
Follow these instructions to get the best performance from your camera:
• The camera is waterproof to 30 metres. Make sure that the camera is securely
closed before using it near water, dust or sand.
• For optimal audio performance, shake the camera or blow on the microphone
24