Paper Transport - Dascom MPI LA650+ Guia De Instalacion

Quick Start-en.book Seite 24 Freitag, 16. Oktober 2009 1:20 13
Paper handling

Paper transport

Pause Front1
Park LF/FF Online
1 2 3 4
Setup
24
Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
Insert the single sheet straight as far into the input tray as pos-
sible.
Press the Online key to set the printer to ready status.
The sheet is automatically loaded when the printer is in on-
line mode and receives data from the computer.
The printer reports a paper out condition by displaying
paper from single and beeping.
Only press the Load (4) key if you want to load paper before starting the printout.
Loaded paper (fanfold paper/single sheets) can be transported in the printer in
several ways.
Make sure that the printer is in offline mode (Pause); press the Online key, if
necessary.
Key Park (1): If fanfold paper is loaded in the printer, it is fed to the park posi-
tion or the tear position. If a single sheet is loaded, it is ejected.
Key (2): Short keypress: Paper is transported upwards step by step
Long keypress: Continuous transport upwards.
Key (3): Short keypress: Paper is transported downwards step by step
Long keypress: Continuous transport downwards.
Key LF/FF (4): Short keypress: Line Feed (LF) is effected
Long keypress: Form Feed (FF) is effected.
Key Online: Moves Paper to tear position if the automatic tear function is acti-
vated.
Quick start guide
Load