Troubleshooting Guide - Guardian Technologies SPA45 Instrucciones De Uso Y Cuidado

INSTRUCTIONS
SET-UP
1. Place the device on a solid surface.
2. Insert the power adapter into the port of the device.
3. Insert the power adapter into an electrical outlet.
4. Adjust the stand at an angle between approximately 90 and 70 degrees.
5. Orient the head and body toward the light. Concentrate on the activities illuminated
by the lights (e.g. reading, eating, and computer work) and not on the light itself.
DO NOT STARE DIRECTLY INTO THE LIGHT OF THE DEVICE.
To minimize eyestrain make sure the room is well-lit.
Sit
12-16 inches
Away from light
DO NOT STARE DIRECTLY INTO LIGHT
USAGE
1. Turn on the device by pressing the power control.
2. Select brightness intensity. There are 3 intensity levels depending on preference.
a. Press "+" to increase intensity.
b. Press "-" to decrease intensity.
3. Select length of time for session. Push "Timer" control button to toggle between 5, 10, 15
or 30 minutes. Device automatically turns off after selected time. Default time is 5 minutes
if no time is selected.
4. Select color. Push "White/Blue" control button and select based on preference.
White 2,500-10,000 lux. Blue tint provides range of 1,350–3,700 lux.
Cleaning
Clean only with a soft dry-cloth. Never use scouring pads, aggressive liquids, or cleaning
agents that contain abrasives or ammonia.
Never immerse the device in water or any other liquid, nor rinse it under the tap.
Storage
If the appliance will not be used for an extended period of time, remove the cord, fold in the
base and store in a safe, dry location where it will not be subject to damage.
Disposal
• Dispose of the device in accordance with local regulations.
• Your local or national recycling organizations may also have disposal information.
E-6
FAQ's
Question
Can I get sunburn from using the device?
Do I have to remove my glasses when
I use the device?
Can the light harm children or pets?
When will I start to notice improvement
from using the device?
Can the lamp of the light be replaced?
Normal usage
angle 90º - 70º
PROBLEM
Unit does not operate or
shuts off unexpectedly.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with the Canadian ICES-003.
Answer
No, this device does not emit any UV light
so it cannot cause sunburn.
No, glasses that are not tinted will not impact
the effectiveness of the device.
No, the light is safe to be around children and
pets but do not let children play with the device.
You might experience the energizing effects from
the first day or 1 to 2 weeks of daily use.
No, the device uses a durable LED lamp that
lasts many years and is not replaceable.
More FAQ's can be found at www.guardiantechnologies.com

TROUBLESHOOTING GUIDE

SOLUTION
Check that the power cord is plugged into the unit.
Check that the power cord is plugged into a
working electrical outlet.
Check that the power button is on.
Check that the timer has not turned the unit off.
Call Customer Service 1.866.603.5900
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
E-7