Snooper Syrius S7000 Guia De Inicio Rapido página 3

To utilise the AURA™ Camera database you will need to register your Syrius and
perform a download. Please refer to 'System Requirements and Software Installation'
later in this Quick Start Guide for further information.
Start Up
1. Installing the SD Card
Before using Syrius, you will need to install the SD Card included with the device. The SD
Card comes complete with a digital map of UK & Ireland or Western Europe and is also
where the AURA camera database is stored if you choose to subscribe and download it.
TM
Start by moving the 'Batt. ON/OFF' switch located on the back of the unit to the 'ON'
position, then remove the SD card from its packaging and insert it into the SD Card slot
as indicated. Switch on the device by pressing and holding the standby power button
located on the left hand side of the unit for 2 seconds. Press the 'Navi' icon from the menu
options. As soon as the 'Navi' icon is pressed, Syrius will automatically synchronise with
the SD Card. Once the synchronisation is completed, the SD Card will not function with
any other device. Your Syrius is now ready to navigate and the camera database can be
downloaded if necessary.
Please note that if the unit does
not activate when you press and
hold the standby power button for
2 seconds it may require charging.
Refer to the section 'Charging the
internal battery' later in this guide.
SD Card
3 • UK