Display - Ariston NIVOS Serie Instrucciones Para El Uso Y El Mantenimiento

GB
1.2 Smart Display
The air conditioning unit has a display which enables viewing of
the operating parameters (see figure).
• Led
The symbol turns different colours, depending on the
operating mode:
- Blue in cooling mode.
- Orange in heating mode
• ECO Led
Indicates that the energy saving function is active (in cooling mode
only).
• Led
Indica che è attiva la funzione Wi-Fi e il climatizzatore è connesso alla
rete.
• Led
- Indicates the temperature set in normal operating conditions.
- displayed for 3 seconds on activation of TIMER, SWING, TUR-
BO or SILENCE.
- displayed for 3 seconds on deactivation of TIMER, SWING,
TURBO or SILENCE.
- is displayed during SELF CLEAN operation.
- is displayed during preheating of the refrigerant, by regulating
the fan on the internal unit, until the gas reaches 23°C. This opera-
tion is used to avoid blowing cold air into the room in the first few
seconds of operation.
- is displayed for 15 seconds when the air conditioning unit rea-
ches 240 hours of operation, to indicate the need to clean the air fil-
ters. At each new start-up, the message is repeated until the internal
counter is manually reset by pressing the LED button on the remote
control 4 times. This operation can be carried out only during the 15
seconds in which the message is displayed.
- is displayed for 15 seconds when the air conditioning unit rea-
ches 2880 hours of operation, to indicate the need to replace the
special filters. At each new start-up, the message is repeated until
the internal counter is manually reset by pressing the LED button on
the remote control 4 times. This operation can be carried out only
during the 15 seconds in which the message is displayed.
- is displayed when the air conditioning unit is in Access Point
mode, for configuring the Wi-Fi module.
32 /

DISPLAY

TEMPERATURE
WiFi
ECO
FUNCTION