2.4 ID selection
Within a group, each RF-TRX needs to have a
different ID from »00« to »99«. Every group
must have a RF-TRX set to the master-ID »00«,
which defines it as the master transmitter of the
group. In this case, »MASTER« and »TALK« are
indicated on the display. To set the ID, continue
as follows:
On the powered-up device, press and hold
the MODE-button for 3 seconds. The symbol
»GRP« on the display will blink.
Press the MODE-button again. The symbol »ID«
will start to blink. By using the »+« and »-« but-
tons, select an ID from 00 to 99, while taking
care that each device within the group has its
own number. After the selection, wait for 3 se-
conds to set the selected ID number.
6 English