Wireless Dmx Linking; Wireless Configuration - Chauvet DJ FREEDOM GOBO IP Guía De Referencia Rápida

EN

Wireless DMX Linking

The Freedom Gobo IP does not have DMX input or output, but can work with a DMX controller using D-Fi Hub or
FlareCON Air products.

Wireless Configuration

The Freedom Gobo IP can be operated in wireless mode. For more information about configuring this product to transmit or
receive in wireless mode, download the Freedom Gobo IP User Manual from the Chauvet website.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 510.
You can wirelessly sync an unlimited amount of receivers to one transmitter. To ensure strong signals, the units
should remain in an unobstructed line of sight of each other.
IRC-6 (Infrared Remote Control)
The Freedom Gobo IP can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the Freedom Gobo IP User Manual from www.chauvetdj.com.
Gobos
The Freedom Gobo IP comes with 10 wedding-ready gobos. The Freedom Gobo IP can also be used with any gobo that
is 25.8 mm x 18.6 mm maximum image size. The gobo can be made of thin metal or acetate transparency, or it can be
made from 35 mm slides.
Wedding-Ready Gobos
5
QUICK REFERENCE GUIDE
Freedom Gobo IP QRG Rev. 4