Publicidad
Idiomas disponibles
Idiomas disponibles
Components
Kreg Jig
Master System
®
Face Clamp
TM
Perfectly fl ush Kreg Joints
, in no time.
TM
For the best results, place the Face Clamp™
on the joint directly over the center of the
joint line. Make sure the large pad of the
clamp is on the face side of the joint (opposite
the Pocket-Holes) to keep the workpieces
perfectly fl ush. Clamp fi rmly to reduce the
possibility for workpiece movement.
Portable Base
Take your work on the road.
Begin by removing the Index Pin and Drill
Guide form the Benchtop Base, and placing
them in the portable base. Next, connect
the Portable Base to the Face Clamp™
using the locking tabs on the back side.
With the base attached to the clamp,
you've got a high-speed portable Kreg
Jig
®
for on-the-road or at the jobsite.
800-447-8638
For more detailed instructions, please
visit us online at www.kregjig.com.
For more detailed instructions, please
visit us online at www.kregjig.com.
Components
Kreg Jig
Master System
®
Dust Collection Attachment
Keep a clean shop.
This simple attachment is a real time saver. It
snaps easily into place on the back of your
jig providing compatibility with any standard
1-1/4" vacuum hose. In addition to a clean
shop, it also provides faster/easier drill
strokes and extends the life of your drill bit.
Material Support Stop
Repeatable Pocket-Holes.
When you're building a large project there
are several instances where you may need to
repeat the same Pocket-Hole over and over
again. This simple stop can be positioned at
any distance from the jig, making it easy to
duplicate precisely placed holes. In addition,
the stop can also be swung out of the way to
serve as a support for large panels.
www.kregjig.com
Publicidad
