BRINKS 183G-500 Manual De Instrucciones página 11

VS-534
FLUID STRAINER
Primary fluid strainer that attaches
between fluid outlet valve and fluid hose
to strain material. Components made of
stainless steel with a nylon filter. Comes
standard with 100-mesh screen. For more
information see SB-7-072.
HFRL-508, HFRL-509
CLEAN AIR™ CONTROL UNITS
These units are designed to remove
dirt, pipe scale and most liquid aerosol.
Includes an automatic drain which
expels liquids which accumulate in
the filter bowl.
29-3100 SCRUBS
®
HAND CLEANER TOWELS
Scrubs are a pre-moistened hand cleaner
®
towel for painters. No water is needed.
83-2924 FLUID Y-STRAINER
Attaches on fluid outlet of tank.
Includes 100-mesh filter screen.
(Additional filter screens in other
mesh sizes available.)
77-2928-R5.2 (11/2015)
ACCESSORIES
DISPOSABLE TANK LINERS
Molded polyethylene tank liners reduce solvent
waste and tank cleanup time. The liner is made
of tough, durable, leakproof poly-ethylene and
can be used with all compatible materials.
PTL-408-K20 Kit of 20 tank liners (9.8 gal.)
PTL-412-K8 Kit of 8 tank liners (11.8 gal.)
PTL-415-K10 Kit of 10 liners (19.8 gal.)
PROSPECTOR ™ PRESSURE TANK STRAINERS
FOR 5, 10, AND 15 GALLON TANKS
Prospector™ strainers are an economical way to remove foreign
material from paint, stain, lacquer and coatings.
Inner Diameter .............. 11.75" (298.45mm)
Outer Diameter ........... 15.375" (390.52mm)
Height/Depth ..................... 3.75" (95.25mm)
Case Qty ..................................................... 20
PTS-5Gal-K20-200 ........................200 micron
(approx. 65 wire mesh)
PTS-5Gal-K20-400 ........................400 micron
(approx. 37 wire mesh)
PTS-5Gal-K20-600 ........................600 micron
(approx. 28 wire mesh)
11 / 12
EN