Using The Energy Saving Feature; Upgrading The Software - Samsung 4 Serie Manual De Usuario

Ocultar thumbs Ver también para 4 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Energy Saving Feature

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the
"Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
2. Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER
Select the required option ("Off", "Low", "Medium", "High", "Auto") by pressing the ▲ or ▼
button.
Press the ENTER
button.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
• Auto: Automatically adjusts the brightness of the TV screen in accordance
with the scenes.
Press the ExIT button to exit.

Upgrading the Software

Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on your TV.
1. Insert a USB drive containing the firmware upgrade into the SERVICE port on
the rear of the TV.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
3. Press the ▲ or ▼ button to select "SW upgrade", then press the ENTER
4. Press the ENTER
button.
The message "Scanning for USB... It may take up to 30 seconds." is displayed.
5. T he message "Upgrade version XXXX to version XXXX The system would be reset
after upgrade." is displayed.
Press the ◄ or ► to select the "Yes", then press the ENTER
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will turn off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete. When software is upgraded, video and audio settings you
have made will return to their default (factory) settings. We recommend you write
down your settings so that you can easily reset them after the upgrade.
button.
button.
button.
button.
button.
English - 62
TV
Setup
▲ More
Energy Saving
: Off
SW Upgrade
Move
Enter
TV
Setup
▲ More
Energy Saving
: Off
Off
Low
SW Upgrade
Medium
High
Auto
Move
Enter
Move
Enter
TV Rear Panel
USB Drive
TV
Setup
▲ More
Energy Saving
: Off
SW Upgrade
Move
Enter
USB Software Upgrade
Scanning for USB...
It may take up to 30 seconds
USB Software Upgrade
Upgrade version xxxx to version xxxx
The system would be reset after upgrade.
Yes
No
Return
Return
Return
Return

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

450 serieLn26a450c1dLn32a450c1dLn37a450c1dLn40a450c1d

Tabla de contenido