Additional Information - RCA RTD396 Manual Del Usuario

The Setup Menu
Please also note that not all DVD's have surround
sound audio tracks.
Off : To disable Digital output.
Raw: The actual audio format on the disc will be
output, thus if the disc is encoded with Dolby
Digital Surround Sound, the surround sound
audio will be outputted. Only use this option
if you're connected to a system that supports
Dolby Digital Surround Sound.
PCM: Select when connected to a digital stereo
amplifi er. The unit outputs sound in the PCM
stereo format.
Channels
It allows you to select the speaker output mode 2
Channel or 6 Channel (also known as 5.1 Channel
or "Surround").
DEFAULT
This option allows you to return the unit's settings
to the original factory settings. Any changes you
have made to the unit's settings will be reverted
back to the original settings.
Use Default Settings
Language
Video
Default
Note
It will take 3-5 seconds to reset the unit to the
factory default.
22

Additional Information

Troubleshooting
The unit does not switch on.
• Make sure it is plugged in.
• Press the STANDBY/ON button.
The device switches off spontaneously.
• To save power, the device switches off
automatically when it is in STOP mode for more
than 30 minutes without any user intervention.
Switch it on again.
• It might be impossible to read the disc.
• Insert the disc with the printed side facing up.
• Check that the disc can actually be played by
this device.
• Check that the disc's regional code matches the
unit's regional code. This unit's regional code is
1.
• Clean the disc.
There is no picture.
• Check you have switched on the TV set.
• Check the connections.
• Select the AV input assigned to the unit on the
TV.
The picture is of poor quality (with snow or
lines).
• Check the connections.
There is no sound or the sound is of poor
quality.
• Check the connections.
• Make sure the speakers are connected.
No surround sound.
• Check the "Channels" setting under the Audio
section of Setup (page 22). Ensure you've
selected "6 channel" (5.1 surround sound
option).
I can't fi nd my fi le in the jpeg listing.
• Make sure the fi le name is valid.