Maintenance / Cleaning - auna Hydro Manual De Instrucciones

Connect the HYDRO with your computer using the supplied cable. You will need a free USB port. The HYD-
RO will switch on automatically and appear as a mass storage drive after a short moment.
You can now use the HYDRO like a USB thumb drive or external HDD.
Please note:
Use the function „Safely remove USB Mass Storage Device" (right click on the drive symbol or through the
task bar icon) when disconnecting the device.
Do not disconnect the USB cable while transferring or deleting files. This could lead to damage to the file
system or to the player.
• Connect the supplied headphones with the HYDRO.
• Press and hold
• Navigate using the buttons + and -.
•
To switch the device off, press and hold
has been shut off.
Please note:
• The player turns off automatically, if there is no media stored.
• The HYDRO is waterproof up to a depth of 3m (IPX-8).
Reset:
Press + and - at the same time to reset the player.
Charging:
Charge the HYDRO by connecting it to your computer (which must be running). The charging time is approx.
3h. Fully charge the device before initial usage.
If you use an AC/DC USB adapter to charge the HYDRO, make sure its output is 5V (± 0.25V).
Please be reminded that especially pool water and see water have corrosive effects. To keep your HYDRO
in good condition please keep the following instructions in mind:
PC / MAC Connection
Operation
until the LED starts flashing. The HYDRO begins to play music automatically.

Maintenance / Cleaning

. The LED flashes for 3 seconds, indicating the HYDRO
9