Axis Camera Management; Assign An Ip Address In A Single Device; Assign Ip Addresses In Multiple Devices - Axis 212 PTZ Guia De Instalacion

AXIS 212 PTZ/-V Installation Guide

AXIS Camera Management

AXIS Camera Management can automatically discover multiple Axis devices, show connection
status, manage firmware upgrades and set IP addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS Camera Management. In the window that appears double-click AXIS 212 PTZ to
open the camera's home page.
3. See page 10 for instructions on how to set the password.

Assign an IP address in a single device

1. Select AXIS 212 PTZ in AXIS Camera Management and click the
Assign IP button.
2. Assign the following IP address and enter the IP address, the
subnet mask and default router the device will use.
3. Click the OK button.

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of assigning IP
addresses to multiple devices, by suggesting IP addresses from a
specified range.
1. Select the devices you wish to configure (different models can be
selected) and click the Assign IP button
2. Select Assign the following IP address range and enter the range
of IP addresses, the subnet mask, and default router the devices
will use.
3. Click the OK button.
Note:
AXIS 212 PTZ-V will display in AXIS Camera Management as AXIS 212 PTZ.
.
Page 9