HandHeld Transaction Team TT8500 Guía De Arranque página 22

Setup Menu
Submenu
Route
I-12
Description
The Port Routing Config menu displays the port
routing configuration for the input ports.
Note: The Ethernet input port option is only
displayed when the hardware is installed.
• Selecting CMD indicates that the TT8500 should
treat input on that row's particular input port as
TT8500 firmware script command data. If the data
does not conform to a TT8500 firmware command,
the data is ignored and discarded. Selecting CMD
automatically disables all other routing options for
that particular input port.
• Selecting one or more of the other four options for
an input port causes all input data on that port to
be routed. Therefore, the data is re-transmitted as
output data to the checked port(s).
• If any re-transmission routing is selected for an
input port, the command processing for that input
port is disabled.
Press Accept or Cancel to return to the main Setup
menu.
Example 1 (Default settings): All ports treat input
data as command data.
TCP/IP:
[ X] CMD [ ] TCP/IP
Main RS-232:
[ X] CMD [ ] TCP/IP
Aux RS-232:
[ X] CMD [ ] TCP/IP
USB:
[ X] CMD [ ] TCP/IP
[ ] MAIN [ ] AUX
[ ] MAIN [ ] AUX
[ ] MAIN [ ] AUX
[ ] MAIN [ ] AUX
Transaction Team™ TT8500
[ ] USB [ ] RF
[ ] USB [ ] RF
[ ] USB [ ] RF
[ ] USB [ ] RF