Adjusting The Time - ACV RC30 Guia Del Usuario

OPERATING THE RC30
Choosing the Operating Mode
The thermostat can operate in three different
modes: Automatic, Manual or Off. To set the
operating mode press either of the AUTO,
MAN or OFF buttons. The screen indicates
which mode is currently active by displaying
AUTO, MAN or OFF.
• AUTO
(automatic)
thermostat to follow the built-in temperature
program (default
Operating the thermostat in this mode is
the best way to maintain a high level of
temperature comfort whilst maximising your
energy savings.
• MAN (manual) mode sets the thermostat
to act as a simple thermostat with a fixed
setpoint throughout the day. The setpoint can
be adjusted from 5°C to 35°C by using the
or buttons. The thermostat will continue
to maintain this temperature until another
operating mode or temperature is selected.
• OFF mode sets the thermostat to control
to a minimum temperature setting of 5°C
(default) that acts as a frost protection
measure for your home.
During Normal Operation
• Temperature Enquiry
In AUTO, MAN and OFF operating
modes the thermostat will display the
current room temperature. To review the
programmed 'target' temperature (the
temperature which the thermostat is trying
to maintain) press the
'target' temperature value will be displayed
flashing for 5 seconds before returning to
the current room temperature value.
• Temperature Override
During normal operation (AUTO mode) the
programmed temperature can be adjusted
manually by pressing the
or the button. The 'target' temperature
will be displayed and flash for 5 seconds
- during this time the
be used to modify the set value. Note: This
temperature override is cancelled at the
next programmed temperature change.
mode sets the
or personalised).
button. This
or buttons
or buttons can
Using the Special Functions
• HOLIDAY Function
The holiday function allows you to set a
constant temperature (default = 10°C)
for a specified number of days (from 1 -
99 days). This lets you save energy and
related costs when you are away from
home, but resumes normal operation on
the day of your return.
To set the Holiday function:
a. Ensure the thermostat is running in
AUTO or MAN operating modes.
b. Press the holiday
display the holiday days counter and
temperature setting, along with the
holiday indicator
c. Press the
the holiday time (1 - 99 days) and press
the green
d. Press the
holiday temperature (5°C - 35°C) and
press the green
The thermostat will now control to the new
temperature for the set number of days that
your home is vacant. At midnight the holiday
counter will be reduced by one until the
selected number of days have passed. The
thermostat will then return to normal operation
as set by the MAN or AUTO mode. To cancel
the HOLIDAY function or to exit the function at
any time press the

Adjusting the Time

To adjust only the time during normal
operation use the
the time and press the green
to confirm any changes.
EN
button
.
or time buttons to set
button to confirm.
or buttons to set the
button to confirm.
button a second time.
or buttons to adjust
button again
15
to