Hardware Installation - Nexxt Solutions Nebula 1200-AC Manual De Instrucciones

1. Antennas: Four 5dBi omnidirectional antennas.
3/IPTV: This IPTV port can be used for connecting an Internet
2.
Protocol TV receiver, and as a LAN port, when the IPTV feature is
not enabled.
LAN ports (2/1): Connect your local laptop or desktop computers
3.
in your network to any of these RJ45 ethernet ports.
WAN: This RJ45 port is where you will connect the DSL/cable
4.
modem or ethernet line from your ISP.
5. Power DC-IN: Connect the supplied power adapter to this jack.
6. Wi-Fi: Use this button to enable and disable the wireless function.
7. Reset/WPS:
Press and hold this button for about 8 seconds until all LEDs light
up once, and then release it to restore the device to its factory
default values.
Press and hold for a second to use the WPS feature (if enabled).
To successfully establish a WPS link, within the first 2 minutes the
wireless client's WPS feature must be enabled.

3. Hardware installation

1. First determine the optimum location for the router. The best place
is usually at the center of your wireless network with the antennas in
the upright position.
2. Then, connect the modem to the internet port of the router using
the supplied ethernet cable.
3. Connect your PC to the router if using a wired connection.
4. Insert one end of the supplied power adapter to the AC input jack
located on the rear panel of the router, before plugging the other
end to a standard electrical wall outlet.
4
1
3
2
4. Router configuration
1. Open a web browser to access the main web interface. Type
nexxtwifi.com or 192.168.0.1 in the address bar and press Enter
on the keyboard.
2. The Quick setup wizard will come up to assist you in completing the
internet settings. Click on Start to initiate the process.
3. Select your connection type and click on Next. For the purposes of
this guide, the DHCP option was selected.
4. In this screen, you can set up the Transmit power, SSID and
Password. Once you finished configuring these settings, click on
Next to continue.