Sricam SriHome Serie Guia De Inicio Rapido página 4

Step4. Add the Camera to App
Device
Input device name to search device
?
No device list, please add one!
4-1
Step5. Connect the camera to Wi-Fi
Settings -> Network Settings ->Choose WiFi ->Confirm ->Enter WiFi password ->Confirm->Save.
(as figure 5-1 to 5-6)
Device
Input the device keywords to search device
IPCam
5-1
Add
1
Input the device's ID
A00*******
Please name the device
IPCam
Input password
(Default:888888)
888888
4-2
Settings
Home
Settings
Time Settings
Video Settings
Alarm Settings
Record Settings
Network Settings
Security Settings
Visitors Management
System
Device Reboot
5-2
You can scan the QR code or
Next
input the camera ID manually
2
IP Camera
Power: **V
ID: A0***********
Password: 888888
RoHS
The label is attached on
the camera
Network Settings
Network Config
Enable DHCP
IP Address 192.168.1.121
Subnet 255.255.255.0
Gateway 193.168.1.1
DNS1 192.168.1.1
DNS2 8.8.8.8
Note: After setting up WiFi successfully,
unplug the Ethenet cable and wait for a
minute to access the camera
Available WiFi List
Paladin Tek-2.4G-BRTV
P25557
EN
Save
Wireless network
5-3
03