Front Panel; Rear Panel; Power Cable - M-Audio BX Subwoofer Guia Del Usuario

Features

Front Panel

1. Subwoofer Driver: Redesigned and
upgraded for the BX Subwoofer, the
transducer driver utilizes a 10" (25.4
cm) composite diaphragm and well
damped rubber surround, all driven
by a high-temperature voice coil. It is
designed to deliver a tight and
punchy low-frequency response (in
contrast to the "boomy" or "hyped"
response that is often characteristic
of underdamped subwoofers). The
driver's high Bl factor (electromagnet
force factor) creates a powerful motor
that allows the cone to follow the
input signal very accurately, resulting
in excellent low-frequency extension
and transient response.
2.
LED Indicator: The LED Indicator
lights up blue when the subwoofer is
powered on. When the Subwoofer
Bypass feature is engaged, the LED
Indicator will flash red to indicate
that no sound is coming out of the
subwoofer and
bandwidth signal is being routed to
the direct-field monitors. While in
Thermal Protection mode, the LED
Indicator will illuminate solid red,
and no audio will be heard from the
subwoofer.

Rear Panel

1. AC Voltage Selector: Set this
switch to the correct setting for your
location: 115 V and 230 V. Use the
115 V setting for the USA and
Japan, or use the 230 V setting for
most of the UK and Europe. Make
sure this switch is in the proper
position for
attaching the power cable.
2. Power Input: Use a standard IEC
power cable (included) to connect
this input to a power outlet.
3. Power Switch: Use this switch to
turn the subwoofer on and off.
that the full-
your area before
2
1
5
6
7
11
12
4
13
8
9
4
10
3
2
1