GENERAL WARNINGS
PLEASE READ THE FOLLOWING INFORMATION FOR PROPER INSTALLATION
- The identification plate, with technical data, lot number and brand name is visibly applied to the device. The
label must not be removed.
- Before putting the unit into operation, it is mandatory to remove all protective laser films present.
- Never use steel sponges or sharp scrapers, its will damage the surfaces. Use ordinary non-abrasive products,
use, if necessary, wood or plastic tools. Rinse thoroughly and dry with a soft cloth or microfiber cloth.
- Do not use dishes or containers made of plastic material. The high temperatures could melt the plastic, damag-
ing the appliance.
- Do not use sealed tins or containers in the appliance. During cooking Overpressure may occur inside the con-
tainers creating danger of bursting.
- Do not leave the appliance unattended during cooking that can free fats or oils. Fats and oils may cause fire.
- Use tools and utensils that are resistant to high temperatures.
- Due to the temperature, the colour of the surfaces may vary.
- Do not paint or apply objects to the unit.
- Do not use any fuel other than wood.
AND OPTIMUM PERFORMANCE OF THE PRODUCT.
EN
13