instruction in the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
If the supply cord is damaged, it must be replaced by a qualified engineer in order to avoid a
hazard.
Ensure all parts are completely dry before filling the appliance with oil or liquid fat.
Do not switch the appliance on until it has been filled with oil or liquid fat. Do not overfill.
Exercise caution during frying as the appliance will emit hot steam and may spit out hot oil.
Always dry food before frying to prevent the oil frothing or spitting.
Take care not to touch the hot surfaces of the appliance.
When cooking is finished, turn the thermostat to the minimum position and unplug from the
supply.
Do not move the appliance until the oil or liquid fat has cooled.
Ensure there is sufficient ventilation around the appliance to allow the escape of heat and steam.
Do not immerse the appliance in water or any other liquids.
This appliance contains no user serviceable parts. All repairs should only be carried out by a
qualified engineer. Improper repairs may place the user at risk of harm.
Do not operate the appliance after a malfunction or if it has been dropped or damaged in any way.
Do not leave the appliance unattended whilst connected to the mains power supply.
This appliance must be unplugged from the power supply after use and whilst any maintenance
such as cleaning is carried out.
The appliance must be used on a stable, heat resistant surface.
Do not use the appliance for any purpose other than that for which it is designed.
Ensure that the supply cord is kept away from heat or sharp edges that could cause damage.
This appliance is intended for domestic use only. It should not be used for commercial purposes.
Do not use this appliance for anything other than its intended use.
10