Power Failure; System Errors Alarm; Alarm Function Table - Kenmore 970-247721 La Guía Del Control De La Electrónica

pOWER FAILURE

When power to the freezer is restored after the occur-
rence of a power failure, the "Power Loss" LED will be
illuminated.
If the internal temperature of the freezer has risen to
a temperature greater than 23ºF (-5ºC), the "Hi Temp"
display indicator will also be illuminated and there will
be an audible beep every five seconds. Press the Alarm
Reset button to turn the audible alarm (beep) off.
If this condition persists, the "Duration" indicator will
also be illuminated and the display will show how many
hours (up to a period of 48) the internal temperature has
been above 23ºF (-5ºC). Food quality is considered to be
impaired at temperatures greater than 23ºF (-5ºC). It is left
to the user's discretion to decide how to best manage the
contents within the freezer.
Figure 7
SYSTEM ERROR ALARMS
If "E7", "E8", or "E9" are shown on the display every half
second and the control panel beeps every five seconds,
call service repair to correct the problem. Press the Alarm
Reset button to turn the audible alarm (beep) off. Until
changes are made, freezer will continue to run.

ALARM FUNCTION TABLE

Except during power loss, the alarm indicators illuminate
whenever there is an alarm status.
Display Status Function
Cabinet Normal operation None
temperature
setting is
displayed
Alternating "E' Operational error
and "7", "8" or "9"
every half second
Control panel Door Ajar
beeps every 5
seconds. "Door
Ajar" LED is lit.
Control panel Freezer
beeps every 5 temperature too
seconds. "Hi high.
Temp" LED is lit.
"Power A power failure
Loss" LED is occurred.
illuminated.
Display off. Power failure
4
Response
Contact service
technician.
Close door. Press
Alarm Reset
to mute audible
alarm (beep).
Contact service
technician. Press
Alarm Reset
to mute audible
alarm (beep).
Press Alarm
Reset button.
Reconnect power
supply.