Selecting The Media Playback Mode; Playing Audio Cds - Denon Professional DN-500CB Guia Del Usuario

Selecting the Media Playback Mode

To select what kind of media you want to play:
To cycle through the available options, press the CD/AUX/USB/BT button.
• CD: audio CD, CD-DA, CD-ROM, or MP3, or CD with audio files (CDR) (see
• Aux: device connected to Aux In (see
• USB: USB device (mass storage class) (see
• Bluetooth: Bluetooth device (see

Playing Audio CDs

To play audio CDs:
1. If the unit is off, press the Power button to power it on.
Important: Do not insert a CD when the power is off. Doing so may damage the unit.
2. Insert a CD into the CD slot. (Hold the edges of the CD without touching the recorded surface. Be careful not to
trap your fingers when the disc is drawn into the unit.)
3. Select CD as the media type (described in
The CD will start playing automatically when Power-On Play mode is active.
In CD Mode, you can perform any of the following operations:
• To start, resume, or pause playback, press the Play/Pause button.
• To stop playback, press the Stop button.
• To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will
rewind/fast-forward at 5 times the normal playback speed. To resume playback, release the button.
• To skip directly to a track:
1. If in Pause, Stop, or Play mode, press one of the Number buttons (0–9) to enter the desired track number. If
the track number is two digits, press the buttons in succession (e.g., 1 then 2 for Track 12). Alternatively, turn
the Jog Dial to select a track and press the Jog Dial to load the track.
2. If a track was paused, press the Play/Pause button after loading the track to have it begin playback. If a
track was playing before selecting a track, the new track will play once selected.
• To select a Repeat Playback mode, press the Repeat button. It will cycle One
indefinitely), Repeat All (the list of all tracks will repeat indefinitely), and Repeat Off (no tracks will repeat).
• To select the Play Mode, press the Random button. It will cycle through Random
random order [for up to 256 tracks]), and Single Play () (the current track will play until its end and then stop.
• To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much time
has elapsed of the current track), Remaining (how much time remains of the current track), Total Elapsed Time
(how much time has elapsed of all remaining tracks), and Total Remaining (how much time remains of all
remaining tracks. This applies only to CDs.)
• To eject a CD, press the Eject button when the unit is stopped or paused. Ejecting will appear in the display
while ejecting the CD. No Disc will appear when there is no disc in the CD slot.
Important: Please see
for more information about CD handling and care. When powering on the unit, hold the Eject button to engage Force
Eject Mode.
Playing Audio from an External
Playing Audio from a Bluetooth
Other Information > CDs
Playing Audio Files On a USB Flash
Selecting the Media Playback
to learn more about the types of CDs the DN-500CB supports and
Playing Audio
Device)
Drive)
Device)
Mode).
(the same track will repeat
(the tracks will play in a
CDs)
9