Removing Clogs - Panasonic MC-UL915 Instrucciones De Operación

Removing Clogs

Hose Inlet
Entrée du tuyau
Conección de
manguera
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢ ➢ Check the handle and extension
wand area.
➢ ➢ Remove handle by pressing handle
quick release button.
➢ ➢ Visually inspect the hose and the
base area into which the hose is
connected.
➢ ➢ Remove any visible clog.
➢ ➢ Plug in the vacuum cleaner and turn
it on.
➢ ➢ Stretch the hose to maximum length
and then allow the hose to return to
its storage length.
➢ ➢ Turn off and unplug the vacuum
cleaner.
➢ ➢ Remove lower plate. See: "Removing
and Installing Lower Plate"
➢ ➢ Inspect inlet of nozzle hose and clear
any obstructions.
➢ ➢ Remove dust bin and check for
clogs.
➢ ➢ If the dust bin and filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢ ➢ Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.
- 60 -