Maintenance And Care; Technical Parameters - Grunkel RACP-80D Manual De Instrucciones

by order of the thermostat.
4. Turning the thermostat clockwise will always increase the set temperature :turning it
anticlockwise will decrease the set temperature. The thermostat will automatically turn the
heater on and off.
NOTE: This heater is oil filled and will cool down slowly after the power is switch off . Allow the
heater or cool before moving it and use the built-in handle for the effect.

Maintenance and care:

1. We recommended that you clean your heater at least once a month to remove
accumulated dust and dirt. This will ensure that the heater operates efficiently and safety.
2. Always turn the power switch off and unplug the heater before cleaning.
3. Clean the painted exterior surface with a damp cloth. Do not use waxes or polished.
Thy may react with heat and cause discoloration.
Usage:
1. Before use please check the socket and confirm its rating current larger than 10A and also
safely grounding.
2. Put on the plug, turn the control switch to the highest(clockwise turn to the top), the product
begin work
3. If the socket first be use to the product or the socket often pull off plugs, please check the
socket's touch if well, put on the plug and open the product, half 0'clock later turn off the
product, pull off and check the plug, if the plug very hot（the temperature more the 50℃
), please replace it with well socket.
Adjust temperature; When using, you can turn the control switch and adjust the
temperature. Off: turn off all switch, the indicator off.

Technical parameters:

Model Rated Rated frequency
voltage
RACP-80D 230V
Electric Drawing
Rated Specification
power
50Hz 800W 7pieces
12
Protection against
electricity category
I