Installation Requirements - Atlantic FNCC15 Manual Del Producto

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Introduction
Thank you for choosing Atlantic's Stainless Steel Fountain Nozzles. Atlantic's Nozzles are
constructed of 304 stainless steel and are intended for fresh water use only.
ATTENTION

Installation Requirements

Nozzles are designed for use in fresh water Fountain and Formal Spillway applications.
Nozzles can be used in water gardens, ponds or any other installation with plant or aquatic
life, but under such conditions they will require additional maintenance to keep them clean
and free-flowing.
Maintenance
Atlantic Nozzles are one-piece, closed units with internal baffling to diffuse and distribute
water flow. If debris becomes lodged inside the Nozzle, it will be difficult to remove. For this
reason, take great care to ensure that debris in the water is screened or filtered out before
entering the Nozzle. Atlantic Nozzles will not corrode when used in fresh water, however
periodic cleaning may be required depending on water conditions. Stainless steel can be
cleaned using stainless steel cleaner or other non-abrasive cleaner and a soft cloth. Nozzles
that accumulate visible deposits should be rinsed regularly with fresh water to remove
deposits before they affect the finish.
Winterization
Atlantic Nozzles are self-draining for easy winterization. When the pump is turned off the
water inside the Nozzle will drain down to water level. Care should be taken that the nozzles
remain above water through the winter. If there is a chance that the nozzles will be fully
encased by ice, they should be removed and stored inside for winter.
Warranty
Nozzles carry a three-year warranty. This warranty is extended solely to the original
purchaser commencing from the date of the original purchase receipt. The warranty is void
if this product is used under any condition other than those for which it is specified. This
warranty excludes labor / costs of labor for removal or installation of any product.
Warranty Claims
In case of warranty claims, the Nozzle should be returned to the place of purchase
accompanied by original receipt.
2
Stainless steel can corrode if not maintained properly. Regular
rinsing and/or cleaning may be required under highly acidic or
alkaline conditions. See Maintenance, below, for more Information.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fnmj15Fnaf10Fnas15Fnhc15Fndf10Fndj10 ... Mostrar todo

Tabla de contenido