General Tv Operation; Using The Channel List; Configuring Parental Settings - 1331 TZ55UBN184 Manual De Instrucciones

Speakers
OSS
Installation Menu Contents
Automatic Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
channel scan Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue
(Retune) stations.
Manual channel
This feature can be used for direct broadcast entry.
scan
Network Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan network channels. Digital Cable: Searches for cable network channels.
Analogue fine You can use this setting for fine tuning analogue channels. This feature is not available if no
tune analogue channels are stored.
Installation Displays installation settings menu. Standby Search (Optional): Your TV will search for new or missing
Settings channels while in standby. Any new found broadcasts will be shown.
Clear Service Use this setting to clear channels stored. This setting is visible only when the Country option is set
List to Denmark, Sweden, Norway or Finland.
Select Active This setting allows you to select only the broadcasts within the selected network to be listed in the
Network channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options. Press the OK button to open the Channel
List. You can filter the listed channels by pressing the
Blue button or open the Edit Channel List menu by
pressing the Green button in order to make advanced
changes in the current list.
Managing the Favourite Lists
You can create four different lists of your favourite
channels. Enter the Channel List in the main menu
or press the Green button while the Channel List
is displayed on the screen in order to open the Edit
Channel List menu. Select the desired channel on
the list. You can make multiple choices by pressing
the Yellow button. Then press the OK button to open
the Channel Edit Options menu and select Add/
Remove Favourites option. Press the OK button
again. Set the desired list option to On. The selected
channel/s will be added to the list. In order to remove
a channel or channels from a favourite list follow the
same steps and set the desired list option to Off.
You can use the Filter function in the Edit Channel
List menu to filter the channels in the Channel list
permanently according to your preferences. Using this
Filter option, you can set one of your four favourite
lists to be displayed everytime the Channel list is
To hear the TV audio from the connected compatible audio device set as Amplifier. You can
use the remote control of the TV to control the volume of the audio device.
Displays Open Source Software license information.
English - 12 -
opened. The filtering function in the Channel list
menu will only filter the currently displayed Channel
list in order to find a channel and tune in to it. These
changes will not remain the next time the Channel list
is opened if you don't save them. To save the changes
on the list press the Red button after filtering while the
Channel list is displayed on the screen.

Configuring Parental Settings

The Parental Settings menu options can be used to
prohibit users from viewing of certain programmes,
channels and using of menus. These settings are
located in the System>Settings>Parental menu.
To display parental lock menu options, a PIN number
should be entered. After coding the correct PIN
number, Parental Settings menu will be displayed.
Menu Lock: This setting enables or disables access
to all menus or installation menus of the TV.
Maturity Lock: If this option is set, TV gets the
maturity information from the broadcast and if this
maturity level is disabled, disables access to the
broadcast.
Note: If the country option in the First Time Installation is
set as France, Italy or Austria, Maturity Lock's value will be
set to 18 as default.
Child Lock: If this option is set to ON, the TV can only
be controlled by the remote control. In this case the
control buttons on the TV will not work.
Set PIN: Defines a new PIN number.