USRobotics 9113 Guía Breve De Instalación página 9

B. Plug the power adapter into a standard power outlet.
C. Turn on your computer.
Step Three: Configure Your Gateway Using EasyConfigruator
You will need active ADSL and Internet service from your local telephone com-
pany or Internet Service Provider (ISP) before you try to go on the Internet. You
may need some of the following information from your ISP:
" VPI/VCI values
" ADSL standard (modulation)
" Encapsulation mode
" Protocol type
" Authentication (PAP or CHAP) for PPP connections
" IP address, user name and password (if they were assigned by your ISP)
" Subnet mask, gateway, and DNS server information
1. Insert the USRobotics Installation CD-ROM into your computer's CD or
DVD ROM drive and do one of the following:
" Windows:
A. If the CD doesn't start automatically, start it manually as follows:
i) Windows Vista: Click Windows
Windows XP: Click Windows
Windows 2000: On the desktop, double-click
ii) Double-click the CD drive.
B. Select your preferred language, then read the license agreement and
click
OK
C. Click
Setup
start.
" Macintosh OS X: Open the CD-ROM and double-click
Configurator
" Linux: Open the CD-ROM and double-click
It can take up to one minute for EasyConfigurator to start.
.
. It can take up to one minute for EasyConfigurator to
. It can take up to one minute for EasyConfigurator to start.
>
Start Computer
>
Start My Computer
My Computer
EasyConfigurator linux-script
English
.
.
.
USRobotics Easy-
.
5