Extraflame 002202512 Instrucciones De Instalación página 58

HEATING STATUS
The menu allows to check the status of the outputs relative to heating.
HEATING STATUS
IN Z1 ON
OUT Z1 OFF
IN Z2 OFF
OUT Z2 OFF
P1
P2
PUFFER STATUS
The menu allows to check the status of the pu er. Allows to check the setting of the maximum and minimum temperature, the superior and inferior temperature of the storage tank in real time
and the status of the relative output.
PUFFER STATUS
setpu er max 58C
set pu er min 65C
pu er highest t. 47C
pu er lowest t. 58C
out pu er o
P1 P3
P2
Š From the main screen, turn P2 to select the STOVE STATUS icon
Š Press P2 several times to con rm until the parameter of interest is displayed
Š Turn P2 to modify the value relative to the parameter of interest
Š Press P2 to memorise and continue or P3 to go back.
Š If you wish to exit without memorising, press key P1
P3
Š From the main screen, turn P2 to select the STOVE STATUS icon
Š Press P2 several times to con rm until the parameter of interest is displayed
Š Turn P2 to modify the value relative to the parameter of interest
Š Press P2 to memorise and continue or P3 to go back.
Š If you wish to exit without memorising, press key P1
HEATING STATUS
SR0 Input I1 status
SR1 Output OUT1 status
SR2 Output I2 status
SR3 Output OUT2 status
SR4 Output I3 status
SR5 Output OUT3 status
SR6 Input I4 status:
SR7 Output OUT4 status
PUFFER STATUS
Set pu er max
SP0
SP1 Set pu er min
SP2 Highest pu er temperature
SP3 Lowest pu er temperature
SP4 Pu er output status