Viewing Video From The Camera - Honeywell FRIEDLAND FGGA05 Serie Manual De Instalación Y Funcionamiento

5.4

Viewing video from the camera

1. Log in to the website
https://GlobalGuard.Friedland.co.uk on your PC.
a) Enter your account information:
"Home ID", "Admin/User ID", "Password".
b) Enter the 4-digit code.
c) Click "Login".
2. Add the new camera:
a) Click "Settings".
b) Click "IP CAM Settings".
c) Click "Add IPCAM" to add a new camera.
d) Enter the MAC address of the camera.
(The MAC address is printed on the camera.)
Note:
Follow the on-screen instructions for registering the camera
to operate with your system correctly.
3. Assign advanced settings to the camera:
- "Camera Info": camera number(automatically
assigned to the camera)
- "Assign Location": camera location
- "Assign Camera Name": camera name
- "Enable Wifi Function": to switch the Wi-Fi
function on/off.
- "Audio": to switch the audio on/off.
The indicator on the IP gateway comes on to indicate that the
new camera has been added to your system:
Note:
The 4 indicators s the connection status of up to 8 cameras:
- If you connect camera 1-4, indicators 1-4 will become
green.
- If you add camera 5, indicator 1 will become orange
(etc.).
- If you disconnect camera 1 but camera 5 is still active,
indicator 1 will become red (etc.).
4. Click "Camera View".
5. Select the camera.
6. Click "View".
7