Parts; Start Up; Loading The Battery - PRETUL TALI-12P Manual De Instrucciones

Charger
Connection Orifice
Battery
Charger

Loading the Battery

1. Connect the charger plug into a 127 V~power outlet.
2. Insert the charger connection into the battery orifice.
The red light shall turn on indicating it starts charging.
• Insert the charger connection into the battery orifice.
The red light shall turn on indicating it starts charging.
• Disconnect the charger from the power outlet once the
charge finishes.
• If the red-light blinks, means the battery is defective.
Replace the battery with a new one.
• If the green light blinks, means the battery temperature
is lower than 32 °F or higher than 113 °F. Wait until the
battery temperature gets to the right temperature range
to charge.
6
ENGLISH
Key-less
Chuck
Battery Level
Indicator
Lithium-Ion Battery
(one battery included)
Charger
Connection

Parts

Torque
Regulator
LED
Light
Switch
Battery
Release
Button
Lithium-Ion Battery
(one battery included)

Start Up

1
Direction of
rotation and
Blocking Button
Handle
2