Technical Features - TecoPonic HYDROPONIC Chiller Line HY150 Manual De Instrucciones

HYDROPONIC
C H I L
3 MANUAL ORGANIZATION AND CONSULTATION MODE
3.1 MANUAL STRUCTURE
The manual is divided into chapters, each corresponding to main topics, that provide
information required to use the product without any risk.
3.2 DESCRIPTION OF PICTOGRAPHS
In this manual the following symbols are used to highlight specifi c information and warnings:
WARNING: This symbol indicates safety regulations for the operator and/or for people who may
be exposed.
CAUTION: This symbol indicates that there is a possibility of damage to the product and/or its
components.
NOTES: This symbol indicates useful information
4 TECHNICAL DATA AND SPECIFICATIONS
4.1

TECHNICAL FEATURES

Specifi cations
Supply
Power consumption (cooling)*
Water inlet / outlet
Minimum / maximum fl ow rate
Maximum Pressure
Weight
Dimensions
Gas inside the conditioner
*Water temperature 20°C (68°F) - All data are approximate and may be changed without notice by TECO.
The device can contain fl uorinated greenhouse gases covered by the Kyoto Protocol.
Type R134a GWP: 1430
5 INSTALLATION AND OPERATION
5.1 UNPACKING OF THE DEVICE
CAUTION: do not turn upside down neither the packaging nor the appliance. Keep the packag-
ing box and materials for future movement or transport.
1) Open the packaging and remove the accessories (Rif. A Fig. 2).
2) Pull out the device grasping side handles.
3) Remove the polystyrene (Rif. C Fig. 3).
4) Remove the plastic bag.
L E R
Verify which gas is present in the model purchased (see plate) Rif. A3 Fig. 4
L I N E
300 l/h – 80 gal/h / 500 l/h – 132 gal/h
0,5 bar 7,25 PSI
12,2 kg - 26,9 lb
215 x 361 x 315 (h) mm
8,46 x 14,21 x 12,4 (h) in
Tab. 4-1
Model
HY 150
230V - 50Hz
230V - 60Hz
115V - 60Hz
150 W
12 mm - 1/2 in
EN
9