Parts & Assembly - Nostalgia Chocolate CFF300 Serie Manual De Instrucciones

PARTS & ASSEMBLY
Your CHOCOLATE FONDUE FOUNTAIN requires little assembly. Prior to use, wipe out Bowl
with a damp cloth and dry. Wash Auger and Tower in warm soapy water, rinse, then dry.
After cleaning, return Auger to Base. Make sure Auger is securely in place by aligning the
opening on the bottom of the Auger with the Base Pin. Do not attempt to place Auger or
Tower on Base or remove from Base while the motor is running. Make sure the Tower is fitted
on the posts in the Base properly.
Tower
Bowl
Base
Auger
SWITCH POSITIONS
Left: Motor / Right: Heater
5