CLEANING
Clean the appliance after every use.
The bowl and the grid have a non-stick coating. Do not use metal kitchen utensils or
abrasive cleaning materials to clean them, as this may damage the nonstick coating.
1. Remove the main plug from the wall socket and let the appliance cool down. Note: Remove
the bowl to let the Easy Fry cool down more quickly.
2. Wipe the outside of the appliance with a damp cloth.
3. Clean the bowl and grid with hot water, some dish-washing liquid and a non-abrasive sponge.
You can use a degreasing liquid to remove any remaining dirt.
Note: The bowl and grid are dishwasher-safe.
Tip: If dirt is stuck at the bottom of the bowl and the grid, fill them with hot water and
some dish-washing liquid. Let the bowl and the grid soak for approximately 10 minutes.
Then rinse clean and dry.
4. Wipe inside of the appliance with hot water and a damp cloth.
5. Clean the heating element with a dry, cleaning brush to remove any food residues.
6. Do not immerse the appliance in water or any other liquid.
STORAGE
1. Unplug the appliance and let it cool down.
2. Make sure all parts are clean and dry.
GUARANTEE AND SERVICE
If you need service or information or if you have a problem, please visit the Imusa website at
www.imusa.com.co or contact the Imusa Consumer Care Center in your country. You can find the
phone number in the guarantee leaflet. If there is no Consumer Care Center in your country, go
to your local Imusa dealer.
TROUBLESHOOTING
If you encounter problems with the appliance, visit www.imusa.com.co for a list of frequently
asked questions or contact the Consumer Care Center in your country.
12