Publicidad
Idiomas disponibles
Idiomas disponibles
1). The Tail of the Light is Control Panel , Above is a Digital Tube, and there are
4 Buttons , From the left to right : 1: ESC; 2 : UP; 3: DOWN; 4: ENTER.
2) . "A001" DMX 512 working Mode . Press "ESC" to show "001" ,press "UP"
"DOWN" could change the Address Code to the Right No. you want , press
"ENTER" to set , when show "YES" and it will show the right Address after 3
seconds , and finish setting . All Channels Functions as below :
CH1: RED BRIGHTNESS CONTROL
CH2: GREEN BRIGHTNESS CONTROL
CH3: BLUE BRIGHTNESS CONTROL
CH4: TOTAL BRIGHTNESS CONTROL
CH5: STROBE SPEED CONTROL
3). "PROG" built-in program for working itself . press "ENTER" to show "A001"
continue to press "UP" to show "PROG" , then press "ENTER" to make sure ,
when it Shows "C1" , Press "UP" "DOWN" there are 4 working format could be
selected .
"C1" RED,GREEN ,BLUE alternating to change , Meantime press
"ENTER" could change the changing speed .
"C2" RED,GREEN ,BLUE chasing for the brightness, alternating to
change the color ,Meantime press "ENTER" could change the changing
speed .
"C3" RED,GREEN ,BLUE,WHITE four color alternating to change ,
Meantime press "ENTER" could change the changing speed
"C4" RED,GREEN ,BLUE WHITE four color chasing for the brightness,
alternating to change ,Meantime press "ENTER" could change the changing
speed .
4). "NODE" Master-slave working format. Press "ENTER" to show
"A001" ,continue to press "UP" to show "NODE" , press "ENTER" to enter ,
show "NASE"
"NASE " Slave format
During "SLA" Master format , press "ENTER" to show "UP" "DOWN" ,
there are 2 Modes could be selected .
"Sound-Active" Mode
"AUTO" working itself .
5). "Nan" static color . press "ENTER" to show "A001" continue to press "UP" to
show "NAN", press "4" enter to show "RED" .
"RED", press "ENTER" to enter and press "UP" "DOWN" , adjust the RED
parTEC - User Manual
"SLA" Master format
Publicidad
