Assembly; Making The Electrical Connection - HAMPTON BAY 37462 Guía De Uso Y Cuidado

Assembly - Hanging the Fan (continued)
2
Hanging the fan
WARNING: The hook as shown is only to balance the fan while
attaching wiring. Failure to hang as shown may result in hook
breaking, causing the fan to fall. The hook must pass from
inside to the outside of the canopy.
□
Carefully lift the fan motor assembly (D) up to the mounting
bracket (A).
□
Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket socket. Ensure that the tab on the
mounting bracket (A) socket is properly seated in the groove
in the hanger ball. If using close-to-ceiling mounting, hang the
fan on the hook provided by utilizing one of the holes at the
outer rim of the ceiling canopy (C).
A
D
3

Making the electrical connection

WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
□
The fan comes with 30 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (C), if you do not wish to cut the wires,
A
you will need to neatly wrap them.
□
B
Spread the wires apart so that the green and white wires are
on the side of outlet box and the black wire is on the other
C
side.
□
Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (AA).
D
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (AA).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (AA).
□
Secure each wire connecting nut using electrical tape.
□
Turn the black wire connecting nut upward to one side of the
outlet box (OO), turn the green and white wire connecting nuts
upward on the other side, press the wires into the outlet box
(OO).
Black
Blue & Black White Green
9
Please contact 1-800-283-7048 for further assistance.
White Green
Outlet box
in the ceiling(OO)
Black White Green or bare wire