Kenmore 116.36822 Manual Del Propietário página 15

TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the aqitator must be cleaned every
time the belt is chanqed.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Use Clean Agitator
HEAVY - every week
(used daily)
MODERATE - every month
(used 2-3 times/week)
LIGHT - every 2 months
(used 1 time/week)
Remove any dirt or debris in the belt path
area or in the agitator area.
Agitator Assembly
TO REPLACE BELT
NOTE: See PARTS AND FEATURES for
belt number.
Loop the new belt on the motor shaft.
Loop the end of the new belt on the agitator.
Insert the agitator by placing the rounded
portion of the end cap down into the slot
in the nozzle base.
NOTE: Care must be taken due to the belt
tension during reassembly.
BELT ROUTING
Press firmly, checking to see that each end
is completely inserted.
Belt-
Agitator Assembly
Check to see that the belt is centered in
the belt groove. Turn the agitator with your
fingers to see that it turns freely.
15