Kenmore 116.36724 Manual Del Propietário página 20

Always follow all safety precautions when
cleaning and servicing the vacuum cleaner.
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before ser-
vicing or cleaning the unit. Failure to do
so could result in electrical shock or
personal injury from cleaner suddenly
starting.
If the cleaner does not seem to have ade-
quate suction, first check if the dust bin is
full or if a filter is clogged. See DUST BIN
CLEANING and FILTER CHANGING.
If the dust bin and filter areas are free of
clogs, check the hose area. Remove the
lower end of the stretch hose from the
cleaner by grasping the hose collar, twisting,
and pulling straight out.
Plug in the vacuum cleaner and turn it on.
Stretch the hose to maximum length and
then allow the hose to return to its storage
length.
Turn the unit off and unplug the unit.
Visually inspect the hose and the base area
into which the hose is inserted.
Remove any visible clog.
Reassemble the stretch hose to the exten-
sion wand.
If the dust bin and filter areas and the hose
areas are free of clogs, check the nozzle
area. To check this area, see the section on
BELT CHANGING AND AGITATOR
CLEANING,
WARNING
Personal Injury Hazard
DO NOT place hands or feet underneath
the unit at any time.The agitator will be
revolving rapidly when the vacuum is
turned on and is in the carpet setting.
Return the cleaner to the upright position
before plugging into an electrical outlet.
2O