About This Guide - Chauvet Professional Amhaze Whisper Guía De Referencia Rápida

Amhaze Whisper QRG
About This
Guide
Disclaimer
Safety Notes
The Amhaze Whisper Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX values.
Download the User Manual from
The information and specifications contained in this QRG are subject to change
without notice.
·
Depending on the amount of haze generated, all haze machines may set off
smoke detectors.
·
Drain the tank before transporting the product.
·
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do
not expose this product to rain or moisture.
·
Always disconnect from power before cleaning or replacing the fuse.
·
Replace the fuse with the same type and rating.
·
Do not operate this product if the housing, fluid tank, or cables appear
damaged.
·
In the event of a serious operating problem, stop using immediately.
·
DO NOT open this product. It contains no user-serviceable parts.
·
Do not use for space heating purposes.
·
Never disconnect this product from power by pulling on the cord.
·
Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
·
USE a safety cable when mounting this product overhead.
·
Do not touch the output nozzle on this product. It is very hot during operation
and it may remain hot for several hours after turning the product off.
·
Do not leave any flammable material within 50 cm of this product while
operating or connected to power.
·
Only use Chauvet PHF haze fluid.
·
Do not add anything to the haze liquid.
·
Do not drink the haze liquid.
·
Do not allow the haze liquid to touch your skin or eyes.
·
Do not connect this product to a dimmer or rheostat.
·
Only connect this product to a grounded and protected circuit.
·
Only use the handles to carry this product.
·
The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
·
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
·
CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation may
form on the internal electronics of the product. To avoid causing a failure,
allow product to fully acclimate to the surrounding environment before
connecting it to power.
www.chauvetprofessional.com
2
EN
for more details.