Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Structural Rough-Ins
Mounting for standard ADA and TAS height shown.
Areas highlighted in gray require sufficient backing
compliant with local building codes.
33½"
(851mm)
Ref. Rim
Height
(813mm)
CODE
A
Install (1) ³⁄₈" wall anchor with a minimum pull-out force of 1,000 lbs. per local codes at locations shown
B
Install (2) wall anchors per bracket with a minimum pull-out force of 100 lbs. per local codes at locations shown
C
Rim Height
Bradley • 215-1807 Rev. C; ECN 16-08-008
Wall Bracket
A
C
26³⁄₈"
(670mm)
32"
30"
(762mm)
bottom
of wall
bracket to
finished
(610mm)
floor
Provide structural backing compliant with local building codes.
Vertical Height Adjustments
33½"
No Adjustment
30½"
Subtract 3"
26"
Subtract 7½"
36½" (927mm)
C
L
10½"
(267mm)
B
B
12¼"
12¼"
(311mm)
(311mm)
19¾"
19¾"
(502mm)
(502mm)
24"
24"
(610mm)
DESCRIPTION
Standard, ADA & TAS
Juvenile, ADA & TAS
Secure bracket to wall using min.
(2) ³⁄₈" anchor bolts to the left of
C/L and min. (2) ³⁄₈" anchor bolts
to the right of C/L. The (2) anchor
bolts to the right of C/L must be
min. 16" apart from the anchor bolts
to the left of C/L. When mounting
is complete, check to ensure the
bracket is level.
A
C
32"
(813mm)
26½"
(673mm)
Trap Cover Bracket
Fixture Style
Junior
5/20/2016
ELX-2
(2x)
QTY.
2
4
2
7
Publicidad
Tabla de contenido
