iPod/iPhone is not recharging
Cradle will not fix into the i-Station
I have lost a part for the i-Station
i-Station goes into standby mode when the
music is playing on the iPod/iPhone
i-Station goes into standby mode when music
is playing on a audio device connected to the
'line-in'
Remote Control is not working
No Picture
iPod/iPhone not responding
spare Part list
Part no.
Item code
1
YAD011
AC ADAPTOR (INTERCHANGEABLE POWER PLUGS)
2
YCB000K
LINE IN CABLE (BLACK)
3
YRM027
REMOTE CONTROL
Cradles for iPhone/iPhone 3G, touch/touch 2G, classic 80GB/160GB,
4
YCR027
nano 3G/4G
Should you have any setup problems with the i-Station (WIP027) please contact our Technical Support Hotline on
+44 (01923) 471 000 – National/International call rates apply or Email support@logic3.com - Spare parts are avail-
able for some models at our website www.logic3.com
Ensure the correct cradle is used with your iPod/iPhone.
Ensure the Battery Switch is in the OFF Position.
Ensure your i-Station is connected to the AC Mains
Remove any previously inserted universal dock cradles
Please refer to the spare parts section in this manual
Go into your iTunes library
1. Highlight all the tracks and click EDIT.
2. Select Preferences and select Playback.
3. Turn the Sound Check ON
4. Goto your iPod/iPhone Menu and Turn ON Sound Check.
5. Now re-sync your iPod/iPhone
Now all your songs will be at the same level.
Turn the volume level on the audio device to the maximum level, then use the
i-Station to control your volume levels
Replace Battery.
Check the Battery is inserted correctly (Polarity)
Check your Video cable (Yellow RCA) is connected correclty.
Check your iPod/iPhone is set to TV out (refer to your iPod/iPhone manual for
settings)
Reset the iPod/iPhone (Goto http://www.apple.com/support/)
Item name
7
Price
For prices visit our website at
www.logic3.com