Descargar Imprimir esta página

Main Features - Athena GET Evolution Hourmeter C1 Manual Del Usuario

Publicidad

1 MAIN FEATURES

Exclusive "wireless" system to count engine working hours
Total counter (non-resettable) up to 1000 hours *
Partial counter (resettable) up to 1000 hours *
Control button to reset/visualize counters
Resolution: 10 minutes
Internal battery
IP68 protection factor
* once passed 999 hours and 59 minutes, the display visualize 000.0
2 C1 HOURMETER
DISPLAY
3 DISPLAY READING
C1 counter visualizes hours in this format:
Hours (hundreds)
Hours (tens)
Examples:
12 hours and 59 minutes are visualized as 012.5
13 hours and 05 minutes are visualized as 013.0
4 INSTALLATION
Install the counter, with adhesive strip in the back, in a position with vibration coming from the engine (in
motorbikes the best part is the outer part of the chassis), but not too close to hot components (as exhaust).
Please clean deeply surfaces before install the C1 (for this it is suggested the use of low residue solvents –
eg. acetone) with outer temperatures exceeding 10°C .
In order to avoid accidental detachments it is possible to use holes in the sides of C1 using two tie wraps to
fix the product to the vehicle.
To check a proper installation, please switch on the engine and wait a few seconds (around 8 – 10 s). The
display will switch on showing the working hours and the blinking dot.
.
2
HHH.M
Hourmeter C1 – User Manual rev. 04
ATHENA EVOLUTION srl
Web:
www.getdata.it
-
sales@getdata.it
"S" BUTTON
Hours (unit)
Minutes (tens)
Decimal point
by

Publicidad

loading