KMT-01
VOLTAGE AND CONTINUITY TESTER
The voltage testers may no longer be used if one or several functions fail or if no functionality is
indicated.
Do not use this instrument under damp conditions.
Perfect display I sonly guaranteed within a temperature range of -10℃ up to +55℃, at relative humidity
question <85%.
If the operator's safety cannot be guaranteed, the instrument must be removed from service and protected
against use.
The safety can no longer be insured if the instrument
1. Shows obvious damage
2. Does not carry out the desired measurements
3. Has been stored for too long under unfavorable conditions
4. Has been subjected to mechanical stress during transport.
All relevant statutory regulations must be adhered to when using this instrument.
Appropriate Usage
The instrument may only be used under those conditions and for those purposes for which it was conceived. For this reason,
in particular the safety references, the technical data including environmental conditions and the usage in dry environments
must be followed.
When modifying or changing the instrument, the operational safety is no longer ensured.
44
www.grupotemper.com