Seko POOL BASIC EVO DOUBLE Manual De Instalación página 3

Functions:

Calibration (Press Cal Key for 3 Seconds):
Select the calibration routine pH or Redox by Up or Down key.
o
Standard Routine calibration pH probe is 7 and 4 buffer solution and Redox 465 mV buffer
o
solution

Set Point (Press Set Key):
Press Set Key and choose SetPoint and adjust value with Up or Down Key before press
o
Enter and confirm.



Press Cal and Set Key (both) for 5 Seconds and run Program Setup:
Program_Menu
o







Save and escape Program setup with ESC key
Exit______save
o

Priming Pump Keep Press UP Key for 1 seconds and priming redox pump
priming_____700mv
o

Priming Pump Keep Press Down Key for 1 seconds and priming pH pump
priming_____7.2ph
o

Lock pump function
Press Up and Enter (both) after 5 second flash
o
Press Down and Esc (both) after 5 second flash
o

The unit doses in proportional mode respect at Set Point (
10 minutes time period dosing)
Note: The unit in program menu to go out in automatic mode after 1 minutes of wait time, the unit doesn't save nothing.
Instruction Setting
Sp_750mv___700_mv_
Sp_7.4ph____7.6_ph_
(Press Enter to set the following Item)
Language_
(It's possible to have 5 language EN, IT, SP, DE, FR)
Redox_Measure
setpoint___750_mv

key) It's possible to adjust from 0 to 1000 mV value for Redox
sp_type___low

ofa_time_000_min

alarm_band__000_rx

ph_Measure
setpoint____7.4ph

key) It's possible to adjust from 0 to 14 pH value.
sp_type___acid

ofa_time_000_min

alr_band__000_ph

Temp__25*C_

measure only.
Flow_
(Adjust value with enter and up or down key Enable or Disable)

It's possible to enable(ON) or disable (OFF) signal input
Calibration_probe



Password
(Adjust value with enter and up or down key, standard value 0000)
(Adjust value with up or down key and confirm with enter key)
(Adjust value with enter and up or down
(Adjust value LOW or HIGH)
(Adjust value OFF or set Time)
(Adjust value from 100 to 300 mV )
(Adjust value with enter and up or down
(Adjust value ACID or ALKA)
(Adjust value OFF or set Time)
(Adjust value from 1 pH to 3 pH)
(Adjust value with enter and up or down key) pH
(Adjust value with enter and up or down key)
Full
(pH 7 and 4, Redox 465 mV buffer solution)
Easy
(pH 7, Redox 465 mV buffer solution)
Off
(Disabled)
Rx_Stop
pH_Stop
minimum distance 25%, maximum distance 90% of
press again to unlock
press again to unlock
2