Patient Setup - Ohio Medical Surgical/Free-Flow Instrucciones Para El Uso

Patient Setup

1. Make sure the Pre-Use Checkout Procedure has been performed.
8
Figure 8
2. Clamp the connective tubing and set the mode
selector switch to | (On).

Clamp
3. Set the prescribed suction level.
WARNING ⚠
The regulator MUST be occluded when setting the prescribed suction level so
that the patient does not receive higher than required suction.
4. Turn the mode selector switch to O (Off).
5. Attach tubing to the vacuum port of the collection container.
6. Turn the mode selector switch to | (On).
600
700

8
(On)
400
300
500
50
60 40
200
70 30
High Flow
High Vacuum
80 20
100
90
10
100
Underwater Seal Line
Made in USA
6700-0372-000 (Rev. 10.1) 08/19
2 cm H O
2